Our Custom, Modern Boogie Van

Van Outside

Alright, folks, this post is a long one, but a good one, I promise. So buckle up for the ride! (Yes, that is a van pun!)

Custom Van InteriorTwo years ago we started to recognize our need for a vehicle to haul projects. And although we love the Airstream, we also wanted something a little more nimble and stealthy for camping trips. So, as we do, we got to Craigslistin’. And as always, it didn’t disappoint. George picked up our 1995 Chevy G30 1 ton van for $850. It had previously been a printing company’s van and a band’s van after that. (RIP Get Lit stickers.) [You can see the before pictures here and the transformation pictures here.]

Van DashI knew from the beginning that I wanted our van to be reminiscent of a ’70s boogie van– you know, those vans with murals on the outside and a lot of shag carpeting on the inside. We ultimately decided against both the mural and the shag carpeting, but brought in those ’70s elements with the vintage knobs on the storage space and the furry seat covers. (They don’t make our seat covers anymore, but you can find a similar option here.)

Fun side fact: Our van’s name is NirVANa, and we talked about painting a mural of Bambi, our dog, on the side of the van to look like Nirvana’s Nevermind album cover. We still might do that one day, but for now we wanted to keep the outside of the van a little crusty for financial reasons and so we can camp incognito.

The first big project we did was ripping out the blue carpet and taking out the old seats. Underneath the carpet was a layer of high density foam padding. This was a pleasant surprise because the padding helps to insulate the van. After the carpet and seats were out, we built the bed. We used the same tips and tricks that we used when we built the bed in the Airstream. (More info on how to do that here.)

Bed in a VanWe purchased plush, 4″ foam from a local fabric store for the mattress. They even cut it for us! (The mattress is approximately full size.) While we were at the fabric store, we also bought fabric to make the curtains. Ultimately, we decided to position the bed in the back of the van so we’d have more floor space for project haulin’. By positioning the bed this way, George, who is 6’4″ does have less leg room, but he ends up sleeping at an angle with his feet on the camper toilet box.

Custom Van StorageSpeaking of our toilet box (how fancy!), next we built several boxes out of old barnwood and some new scrap wood we had laying around. We built a box for the front seat, so Bambi has a place to ride. That box also doubles as a cup holder and storage, as well. We also built a box to house our camper toilet for night time emergencies. (Similar toilet model available here.) Lastly, we built a long storage bar for housing camping and van necessities, like tools, firestarters, etc.

Camper VanAfter we had all of the boxes in, we screwed in the floor and the wood walls. We used plywood on the floor and we painted it with an oil based paint. We’ve had good luck with using oil based paint on floors in the past. For the wood walls, we purchased untreated fence boards, whitewashed them (using this method) and screwed ’em up on the walls.

Camper Van InteriorThe most difficult thing we did was put up a canvas drop cloth on the ceiling. For the ceiling in the front seat, we simply cut out pieces of an old ’70s van book and Mod Podged them to the ceiling. That was fairly easy, but a little bit stressful, because we had to ensure there were no creases in the paper.

The ceiling in the rest of the van was more difficult. We took a small foam roller, coated it in wood glue, then rolled it onto the thin particle board that was already in the van and attached, then smoothed the drop cloth to the ceiling. Β This was hard, hot work and if I had to do it again, I’d remove the ceiling first, then attach the drop cloth and screw the ceiling back in.Van Ceiling Detail

Modern Boogie VanWe searched forever for an inexpensive light with a low profile for the front seat, but we came up short. Finally we were in the hardware store one day and George found that small galvanized bucket, so we cut a hole in the bottom, turned it upside down and screwed it in– creating a light for less than $10!

The very last thing we did was add the wood pieces on the ceiling and on the back and side doors. The wood that we used was the last little bit we had leftover from repairing a barn on our property. Putting the wood on the ceiling and doors was just a matter of cutting and screwing!

I couldn’t be prouder of the way the van turned out. It was a true low-budget reno. It functions well for our needs and I think it looks pretty groovy. (People said that in the ’70s, right?)

What do you think? Do you dig it? πŸ˜‰

As always, feel free to chat with me or ask me more questions in the comments.
– Melanie

**This post contains affiliate links.**

10 thoughts on “Our Custom, Modern Boogie Van

  1. oli

    wow, I really dig your paneling! did you screw the boards directly in the sheet w/o preparing the screw holes against humidity and rust?

    1. melanie Post author

      Hey Oli, we predrilled holes through the planks and ribs, then used flathead screws to attach the boards to the ribs. It’s been together over a year and we haven’t had a problem.

Comments are closed.